L 19, L 19), Operations – Panasonic NV-VP32 User Manual

Page 19: Timer recording, 1] press [prog/check] twice, 3] press [cancel/reset] to cancel, 4] press [menu] to exit the on-screen display, 3] press [enter

Advertising
background image

VHS

Operations

Timer Recording

19

≥This unit must be turned on, or in timer recording standby mode.

..............................................................................................................................................................................................................................................................................................................................

[1] Press [PROG/CHECK] twice.

The Timer Programme List screen appears.

..............................................................................................................................................................................................................................................................................................................................

[2] Press [PROG/CHECK] repeatedly to select the programme.

≥Every time you press [PROG/CHECK], the cursor shifts below.

You can also select the programme by pressing [

34].

≥When “JET NAVIGATOR” is set to “ON”, press [1] to display the category.

Press [

1] again to make the previous display appear.

..............................................................................................................................................................................................................................................................................................................................

[3] Press [CANCEL/RESET] to cancel.

..............................................................................................................................................................................................................................................................................................................................

[4] Press [MENU] to exit the on-screen display.

Notes:
≥If timer recording is not completed (due to insufficient tape or cancellation by the user), the

programmed timer recording data will be cancelled from the memory by 4 A.M. two days later.
However, if the timer recording function is activated at that time, the programmed timer recording
data will not be cancelled.

≥After you cancel the programmed timer recording data, the current recording mode during the stop

mode is displayed.

When you wish to set the timer recording for programmes which will be recorded within 1 week and you
have ever recorded the programmes before, you can record them soon with I-TIMER function without
entering day and time by buttons.
≥This unit must be turned on, or in timer recording standby mode.
≥Confirm that the TV is on and this unit viewing channel is selected.
≥Insert a video cassette with an intact erasure prevention tab.

..............................................................................................................................................................................................................................................................................................................................

[1] Press [I-TIMER] to display the menu for Intelligent Timer on

the TV screen.

≥The list of the timer programmes which are recorded before appears.

..............................................................................................................................................................................................................................................................................................................................

[2] Press [

34] to select the timer programme which you want

to record on the following week.

..............................................................................................................................................................................................................................................................................................................................

[3] Press [ENTER].

≥The Timer Programme List screen appears.

..............................................................................................................................................................................................................................................................................................................................

[4] Press [TIMER

] to switch this unit over to the timer

recording standby mode.

Notes:
≥Up to 16 I-Timer Programmes can be memorized.
≥When I-Timer Programmes are increased to more than 16, the oldest one is deleted.

Recording Mode Auto Change Function

During a timer recording performed in SP mode, this function
automatically changes the recording mode if the unit determines that
the remaining tape time is insufficient to record the entire programme.
If the remaining tape time is still not sufficient even in LP (EP) mode,
the programme cannot be recorded to the end.

The recording mode will change as follows:
PAL system:

SP

# LP

NTSC system:

SP

# EP

≥This function cannot change the recording speed to the EP mode

for PAL system.

e.g. NTSC system (when using a 60-min. tape)

≥The tape length must be set correctly (

l 24).

≥Some tapes may not work correctly.
≥If the recording speed changes during a timer recording, some

picture distortion will occur at that point.

To check and cancel a Timer Programme

1st programme

(30 min.)

2nd programme (60 min.)

Timer programming

30 min. at SP

15 min.

at SP

45 min.

at EP

Video tape

DATE CH

ON OFF

29SA 2

20:02

21:30

SP

SU-SA 25

10:30 11:00 A

SU 14

15:00

16:00

SP

19WE 5

22:15

23:30

EP

28FR A1

20:02

21:30

SP

30SU 4

19:10

19:55

EP

– – – –

– –

– –:– –

– –:– –

– – – –

– –

– –:– –

– –:– –

1
2
3
4
5
6
7
8

END:MENU

1
2
3
4
5

DATE CH

ON OFF

29SA 2

20:02

21:30

SP

SU-SA 25

10:30 11:00 A

– – – –

– –

– –:– –

– –:– – SP

19WE 5

22:15

23:30

EP

28FR

A1

20 02

21 30

SP

SELECT:

SET:

Timer recording for the same programme on the following week (Intelligent Timer)

END:MENU

SELECT:

SET:

DAY CH

ON OFF

TU

1

0:22

0:26

LP

END:MENU

SELECT:

ENTER

DATE CH

ON OFF

3 TU

1

0:22

0:26

LP

3 TU

2

2:39

2:43

LP

28 WE

2

2:56

4:00

LP

28 WE

1

2:59

4:00

LP

1
2
3
4

VP32GL.book 19 ページ 2004年6月11日 金曜日 午後4時32分

Advertising