Panasonic NV-VP32 - Manual (Page 39)

39
Using On-Screen Menus
DV
D
Operations
Play Menu
ª Marker
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept markers.)
To mark a position: [ENTER] (at the desired point)
To mark another position: [ 2 1] l [ENTER]
To recall a marker: [ 2 1] l [ENTER]
To erase a marker: [ 2 1] l [CANCEL/RESET]
≥This feature doesn’t work during program and random play.
Notes:
≥The markers are ordered by time. This means that the marker
numbers can change when you add and erase markers.
≥If places have been marked (e.g. with a DVD video recorder),
they are displayed.
≥You can clear existing markers, but they are restored when you
open the disc tray, change the source or switch the unit to
standby.
≥This feature doesn’t work while using a play list.
≥This feature doesn’t work during program and random play.
≥Markers added with this unit clear when you turn the unit off,
change the source, or open the disc tray.
Picture Menu
Audio Menu
Display Menu
[A] Audio attributes ]DVD-V] ]RAM] (Display only)
[B] Audio/Subtitle language
Other settings
Repeat ( l 36)
A-B Repeat
[DVD-V] [RAM]
[VCD] [CD] [MP3] [WMA]
(When the elapsed play time is displayed)
Repeat a section between points A and B within an item.
[ENTER] (start point)
> [ENTER] (end point) > [ENTER]
(cancel)
≥The end of an item becomes point B when it is reached.
≥Some subtitles recorded around point A or B may not appear.
≥A-B repeat is canceled when you press [QUICK REPLAY].
Marker (
l below)
[RAM] : 999 positions
[DVD-V]
[VCD] [CD] [MP3] [WMA] [JPEG] : 5 positions
Picture Mode: ( l 29)
Video Output Mode
480I: Interlace video
480P: Progressive video
(
¢: Progressive output not possible with PAL signals)
≥You can change the video output mode only when “Progressive
Out (Component)” is set to “Enable (NTSC Disc Only)” in
SETUP menu (
l 41).
≥When progressive output is on, closed captions will not be
displayed.
Advanced Surround ( l 35)
Dialogue Enhancer on/off [DVD-V]
(Dolby Digital, DTS, 3-channel or over, where the dialogue is
recorded in the center channel)
This makes the dialogue in movies easier to hear.
On
()Off
Subtitle position/brightness [DVD-V] ( l 34)
Just Fit Zoom [DVD-V] [RAM] [VCD] ( l 36)
Press [ENTER] and select with [ 34]. Then press [ENTER] to
finish.
Manual Zoom [DVD-V] [RAM] [VCD] ( l 37)
Bitrate Display on/off [DVD-V[ [RAM[ [VCD]
When you select “On”:
During play:
Shows the average bitrate (approximate values) of
the video being played
While paused:Shows the data volume of the frame and type of
picture (I/P/B l 46)
GUI See-through
On
()Off
GUI Brightness ( j3 to i3)
Adjust the brightness of the on-screen displays.
LPCM, Digital, DTS, MPEG: Signal type
k: Sampling frequency (kHz)
b: Number of bits (bit)
ch: Number of channels ( l 46)
ENG: English
FRA: French
DEU: German
ITA:
Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese CHI: Chinese
KOR: Korean
MAL: Malay
VIE:
Vietnamese
THA: Thai
¢:
Others
Bitrate
Current 3.973 Mbps
Average 2.336 Mbps
5.0
Mbps
A record of bitrates for
a sampling period Current bitrate
Average bitrate
VP32GL.book 39 ページ ２００４年６月１１日 金曜日 午後４時３２分