Panasonic KX-P8420 - Manual (Page 153)

153
Care and Maintenance
Last —It shows the percentage of the whole printable area covered by each
toner in the previously printed page. This menu cannot show the value
correctly just after the printer was turned on.
• CYAN: ###%
• MAGENTA: ###%
• YELLOW: ###%
• BLACK: ###%
Average —It shows the average percentage of the printable area of all
pages printed covered by each toner.
• CYAN: ###%
• MAGENTA: ###%
• YELLOW: ###%
• BLACK: ###%
Clearing media jams
If the printer has frequent media jams, make sure that you follow these
guidelines:
• Always use high-quality laser paper and transparencies. See pages 207
and 209 .
• Make sure that you load specialty media only in the multi-purpose tray
and that you set the media thickness switch to the correct setting for the
media used.
If a media jam occurs, the printer panel reports JAM AT <LOCATION> , where
<LOCATIONS> are the various sensors throughout the paper path, shown as
A through E in the illustration below.
Image Area
2nd cassette feeder (option)
Jam in location D
(See
page 164 .)
Jam in location E
(See
page 166 .)
Jam in the MPT
(See
page 166 .)
Jam in location A
(See
page 154 .)
Jam in location B
(See
page 156 .)
Jam in location C (See page 158 .)