Panasonic KX-P8420 - Manual (Page 36)

36
Printer Setup
If you do not have a parallel interface cable, you will need to purchase one
from your local computer store or dealer. See “Bidirectional Parallel
Interface” on
page 213 .
To connect a parallel interface cable:
1 Make sure the computer, printer and the other
connected peripheral devices are turned off.
2 Connect the parallel interface cable to the computer’s
parallel interface connector and the printer’s parallel
interface connector.
NOTES:
• The actual connector on the computer may differ depending on
the manufacturer of the computer.
• If the cable is connected to the PC via a printer buffer or selector,
the printer may not print.
3 Connect the power cord to the printer’s AC inlet and to
an AC outlet.
Using a parallel
interface cable
Computer’s parallel
interface connector