Perle Systems PERLE P850 - Manual (Page 28)

Applications
22
Manual Configuration - LMI Type
The LMI Type option allows you to manually specify the type of Link
Management Interface in use by the Frame Relay service provider for
the Frame Relay service.
When the LMI type is set to none, the P850 simply creates frame relay
packets and sends them on the defined PVC’s. The links are not
checked for errors. There is no congestion control checking. The link
is only monitored for control signals.
To manually configure the LMI type the Auto-Learning option must be
disabled.
7
Auto-Learning
Location: Main
Ä Configuration
Ä WAN Set up
Ä Link Set up
Ä Frame Relay Set up
Ä Auto-learning
enabled
7
LMI Type
Location: Main
Ä Configuration
Ä WAN Set up
Ä Link Set up
Ä Frame Relay Set up
Ä LMI Type
The configuration options described here are only for initial set up
and configuration purposes. For more complete information on
all of the configuration parameters available please refer to the
P850 PPP Menus Reference Manual file on the accompanying
CD-ROM.