Perle Systems PERLE P850 - Manual (Page 48)

Applications
42
7
IPX Frame Types
Location: Main
Ä Configuration
Ä IPX Routing Set up
Ä Configure LAN Nets
Ä Ethernet-II Frames
Ä RAW 802.3 Frames
Ä IEEE 802.2 Frames
Ä 802.2 SNAP Frames
Define the appropriate IPX network number for
the appropriate frame type. Note that IPX network
numbers must be unique. If more than one frame
type is to be used, each frame type must have a
unique IPX network number. There must be no
duplicate IPX network numbers within your entire
IPX routed network, they must all be unique. The
IPX network numbers may be any value from 0 to
FFFFFFFF HEX.
Configuration: Since there is not a server on LAN 2 in this
example, the IPX network number may be manually
configured and the P850 router will proceed to route
between the two networks. When manually configuring an
IPX network number for a frame type that has already
learned a network number, IPX routing must be disabled
before the new network number is assigned.