Plantronics CT11 - Manual (Page 15)

29
TIP
C
ALLER
ID
TIPS
If any of the following occurs during Caller
ID, operation will be canceled.
• Press END. The phone will return to
the standby mode (or the call will be
disconnected).
• Press TALK/FLASH or DELETE.
• Place remote in base.
• Receiving an incoming call or page
(from the standby mode only).
• Receive a CIDCW (Caller ID on Call
Waiting) (during a call only).
The idle time is 30 seconds. If the remote
remains idle for 30 seconds, the phone will
return to the standby mode (or back to the
call).
1) When the Caller ID message is received, the
display shows the caller’s phone number
along with the date and time. The incoming
call information is stored in the Caller ID
record. If the Caller ID service includes the
caller’s name, the name will appear on the
display. (up to 15 characters.)
The headset LED
will continue
flashing during
Talk Mode. If you answer a
call before the
Caller ID
message is
received
(Example: before
the second ring),
the Caller ID
message will not
appear.
When a call is
received via a
telephone
company that
does not offer
Caller ID service,
the caller´s phone
number and name
do not appear.
(This includes
some international
calls.)
When the call
is via a private
branch exchange
(PBX), the caller´s
phone number
and name may
not appear.
Y OU MUST SUBSCRIBE TO C ALLER ID SERVICE TO
USE THIS FEATURE .
When the telephone rings, the Caller ID
feature allows you to view the caller’s name
and phone number on the display before you
answer the phone. Additionally, you can dial
the displayed number and store the
information for memory dialing.
Make sure you have turned on the Caller
ID/Call Waiting feature. (See page 4.)
Important:
The total memory locations for Caller ID
messages and Phonebook locations
(including Speed Dials) is 100 in total. When
the memory locations (Phonebook and Caller
ID) is 100, new Caller ID messages will
overwrite the oldest Caller ID messages.
C
ALLER
ID
28
CT11-12_020904 2/13/04 10:47 AM Page 28