Panasonic CQ-VD6505W - Manual (Page 26)

25
26 CQ-VD6505W
English
AV1/AV2
ASPECT
MUTE
MENU
NAVI
TUNE
FOLDER
ALBUM
TRACK
SRC
VOL
ASP
P-MODE
PWR
TILT
CQ-VD6505W
SRC
Press [SRC] to change to the desired
mode.
[SRC]
Source Button
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER] on the remote control.
Preparation:
¡Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
q Touch “Source Button”.
d
w Touch /
(AV1/AV2) on the
Source Selection
Screen.
AV Mode Selection
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). ( a page 37) (AV set to NAVI
INPUT is not skipped even if is set to
.)
¡If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
¡AV terminal is not used for the Panasonic car
navigation system (available in future). Refer to
for setting. ( a System Upgrade
Guidebook)
NAVI SETUP
ON
SOURCE SKIP