Panasonic CQ-VD6505W - Manual (Page 91)

20
21 CQ-VD6505W
English
OUTPUT SELECT
Output Selection
You can have different picture and sound on the front
and rear monitors at the same time.
Preparation: Connect another optional rear monitor.
(
a Installation Instruction)
❑ When the Expansion Module (CY-EM100N, option) is
disconnected:
: same as front monitor*
: DVD/VCD/CD/MP3/WMA
: AV1
: AV2
* iPod with Video is included.
default:
Note:
¡This menu can also be opened by touching/pressing
and holding /[MENU].
¡Images are not displayed on the rear monitor in the
DVD changer mode even if is selected.
❑ When the Expansion Module (CY-EM100N, option) is
connected:
¡Connection of the Expansion Module (CY-EM100N,
option) provides two additional source buttons.
¡Connection of audio-only source to the Expansion
Module (CY-EM100N, option) provides no additional
button.
AUTO
AUTO
AV2
AV1
DVD
AUTO
(Rear Monitor Set up) REAR MONITOR
Note:
¡The screen above shows the case that no device is
connected to the Expansion Module. In such a case,
the additional buttons are displayed gray and not selec-
table.
¡Only single source of audio and video can come out
through the Expansion Module (CY-EM100N, option).
Therefore, if the audio and video from the changer are
played on the front monitor, the audio and video from
the TV cannot be played on the rear monitor at the
same time.
Example:
When a DVD changer and a TV are connected to the
Expansion Module (CY-EM100N, option),
¡ is selectable. However, the setting is not
feasible because the changer is in operation on the
front monitor.
¡To play the TV on the rear monitor, select
for the front monitor, or select a source other than
the Expansion Module.
H-F SETUP
(Hands-free Set Up)
Hands-free Set Up
Preparation: Connect Bluetooth hands-free kit (CY-
BT100N). (
a Installation Instructions)
: Front Left/Right speaker
: Front Left only
: Front Right only
default: BOTH
R ch
L ch
BOTH
(Hands-free speaker) H-F SP