Panasonic CQ-VD6505W - Manual (Page 57)

4
5 CQ-VD6505W
English
<YFX994C134ZA>
Lock Cancel Plate e 2
❏
Transportation Bracket Removal
Be sure to remove the transportation brackets before
use (installation). Use round head screws (5
mm ø x 8
mm) for installation. ( a page 7)
Be careful not to lose these screws.
Round Head Screw (5 mm ø x 8 mm)
Transportation Bracket
❏
Installation Hardware
(For Installation)
Note:
¡The number in parenthesis underneath each accessory
part name is the part number for maintenance and
service.
¡Accessories and their parts numbers are subject to
modification without prior notice due to improvements.
¡Mounting Collar w is mounted on the main unit at
shipment.
¡Use the supplied screws for installation exclusively. In
case of losing any of them, please order the specific
screw.
Qty. Diagram Item No.
Trim Plate
<YFC054C088ZA>
q 1
Mounting Collar
<YFX214C437ZA>
w 1
Rear Support Strap
<YEFG044C002>
<ZZBISVD6503>
u 1
Round Head Screw
(5 mmø x 8 mm)
i 2
Flat-Head Screw
(5 mmø x 8 mm)
o 6
<ZZBISVD7001A>
Mounting Bolt (5 mmø) r 1
Tapping Screw
(5
mm ø x 16 mm)
t 1
Hex. Nut (5 mm ø) y 1
❏ Before Installation
Caution
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any hard
objects.
¡Do not bump the front panel.
a Failure to observe the above may damage or
break the glass on the surface of the touch panel.
❏
Installation Hardware
(For
Wiring )
Qty. Diagram Item No.
Power Connector
(ISO connector)
<YEAJ012890>
!0 1
Reverse Extension Cord !1 1
Clip Connector !2 1