Panasonic CQ-VD6505W - Manual (Page 31)

30
31 CQ-VD6505W
English
MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
: clears the memory to default settings
: no memory clear.
The display returns to the previous one.
appears when
is selected.
: proceed.
: no memory clear. CANCEL
OK
YES
REALLY?
NO
YES
OTHER
Other settings
: operation sound (beep) ON
: operation sound (beep) OFF
default: ON
OFF
ON
(Beep setting) BEEP
: sets to ON if your car has ACC position.
: sets to OFF if your car has no ACC posi-
tion.
default:
Note:
¡For an ACC-equipped car, select ON. The following
functions are available.
¡ The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
main unit through the remote control.
: main unit-specific remote control
: rear monitor (option)-specific remote
control
default:
: LED indicator not blinking with ignition
key being at out-of-ACC
: LED indicator blinking with ignition key
being at out-of-ACC
default:
: displays the menu in English.
: displays the menu in Chinese.
default: ENGLISH
CHINESE
ENGLISH
(Language setting) MENU DISPLAY
ON
ON
OFF
(Security LED setting) SECURITY LED
FRONT
REAR
FRONT
(Remote control setting) REMOTE CONTROL
OFF
ON
OFF
ON
(Setting ACC selection ON and
OFF) ACC SELECT
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.