Rear panel functions – Plinius Audio Odeon Power Amplifier User Manual
Page 10
8
PLINIUS ODEON
Rear Panel Functions
This panel incorporates the terminals for connecting input signals from the source, as
well as outputs to the loudspeakers, power switch, and mains supply. Please remember
that your Plinius Odeon Multichannel Amplifi er is a high quality electronic instrument
capable of an exceptional level of performance. Be sure that you understand your
system’s requirements fully before you make any connection to this amplifi er.
1. INPUT TERMINALS
The input terminals for your Plinius Odeon Multichannel Amplifier are easily accessible
at the top of the channel module panels. Depending on the configuration of your
amplifier when it was purchased, there will be up to six modules fitted, each with it’s
own input connection/s. The Dual Amp modules have two RCA input connectors, one
for each of the two amplifier channels on the module itself.
•
RCA INPUT: This standard RCA terminal is for use with unbalanced signals from
most signal sources such as home theatre processors and stereo preamplifiers.
•
XLR BALANCED INPUT: XLR connectors fi tted to this amplifi er are for use with
balanced line signals from audio preamplifi ers. Balanced signals are carried via a
three way cable that connects all three pins at each end of the interconnect cable.
NOTE: Because of the way our XLR and balanced inputs are configured it is not
possible to connect both XLR and RCA at the same time.
2. RCA/XLR SELECTOR SWITCH (MONO MODULE ONLY)
Each fitted module incorporates a switch that selects the input terminal to be used. It
is possible to use different input types for each channel. Note that there should never
2
2
2
2
2
7
8
4
5
6
1
1
1
1
1
1
2
3
3
3
3
3
3