Plinius Audio Odeon Power Amplifier - Manual (Page 14)

12 PLINIUS ODEON
Where possible, check the wall outlet is switched OFF, then connect the local mains
plug end of the lead to the wall outlet. Check the Odeon is switched OFF, and
connect the IEC end of the cable to the IEC socket at the back of the Odeon. With the
cord fully connected, switch the wall outlet ON.
Now that your Plinius Odeon is configured correctly, switch the power switch on the rear
panel to ON. The display LED will cycle in brightness to indicate the unit is in Standby
mode. Use the STANDBY switch on the front panel to take the unit out of standby and
you can now enjoy your new Plinius Odeon Multichannel Amplifier.
NOTE: This unit must be connected to a mains socket outlet with a protective earthing
connection. The wall outlet socket or Odeon mains switch must be accessible at all
times in case of emergency.
WARM-UP PERIOD
You will find that the Plinius Odeon will become noticeably ‘purer’ in sound after being
on for a period of time. We usually recommend waiting at least 24 hours before
expecting the best quality of sound reproduction from your amplifier.