Plinius Audio Odeon Power Amplifier - Manual (Page 12)

10 PLINIUS ODEON
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This amplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this amplifier in any position where liquids or any foreign
material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Odeon Multichannel Amplifier should be made in the same order
as they are listed in this section. DO NOT attempt to connect your Odeon Multichannel
Amplifier until you have read and fully understood these instructions.
Although these instructions refer to the connection of a Processor, the Odeon can also
be safely installed into multimedia systems by following the same installation guidelines.
Should you require any further assistance, please contact your Plinius dealer.
DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU HAVE CONNECTED
YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.
Note: Module 3 and Module 4 have the shortest ground return paths and will give the
best audio performance. It is recommended that these be used for front left and
right. Any fitted stereo modules should be used as rear channels.
PREAMPLIFER/PROCESSOR INPUTS
Connect your preamplifi er or processor to the input of the Plinius Odeon using suitable
single-ended RCA or Balanced XLR interconnect cables only. If using single-ended RCA
inputs, connect your preamplifi er to the RCA inputs on the back of the Plinius Odeon.
Make sure the RCA connectors are a snug fi t and are inserted all the way in. For XLR
input connection, make sure the connectors are inserted all the way and latch into place.
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other.
PLINIUS PREAMPLIFIER ODEON INPUTS