Plinius Audio Odeon Power Amplifier - Manual (Page 6)

4 PLINIUS ODEON
Unpacking
Open the box from the top and remove the accessories and polystyrene sheets.
Once you have removed all polystyrene sheets you may now proceed to lift the unit
from the box, You will require help with this, as this unit is very heavy. Retain the
packaging for future transportation of this unit.
Placement & Ventilation
Your Plinius Odeon Multichannel Amplifier may operate at a moderately high
temperature, especially during extended listening sessions. With this in mind, we
recommend the following guidelines for placement and ventilation:
•
The ideal location is upon a rigid stand, away from direct contact with any
temperature sensitive materials, furniture or deep pile carpets.
• Ventilation through and around the amplifier should be kept unimpeded.
• Ensure heat vents (slots in the base and lid) are not covered or restricted in any way.
• Equipment racks should be of an open type with no closed side panels and no
closed front or rear panels. Ensure a minimum of 400mm clearance on all sides of
your Plinius unit to other equipment and the shelf above. Ensure the space between
the chassis and shelf below the unit is unobstructed at all times.
• DO NOT place this unit in an enclosed cabinet.
• DO NOT stack other audio components on top of this unit.
• NOTE: This unit has been designed for use in moderate climates only, not for tropical
conditions.
The Plinius Odeon design incorporates a very high level of mechanical decoupling of
the input and output. It can however still be influenced by acoustical feedback in the
operating environment. The use of acoustic cones or a suitably spiked amplifier stand
or table may further enhance the performance of this amplifier. Consult your Plinius
dealer for further advice if required.