Pinnacle Speakers FXDEKO - Manual (Page 109)

Creating a Sequence 109
FXDeko User’s Guide
•
Full and Half Vertical Resolution Rates—FXDeko suggests
adjustments based on acceptability of full and half vertical
resolution rates. Allows some aliasing.
•
Only Full Vertical Resolution Rates—FXDeko suggests
adjustments based on acceptability of full vertical resolution
rates only. Allows only clean rates.
3. Choose OK or press Enter.
Note
When you enter a playback rate for a roll effect, FXDeko
displays any suggested adjustments in a dialog box. You can
choose to decrease or increase duration of the roll or original
line spacing of the graphic. Line spacing adjustments are not
offered when they would not be effective, e.g. if the document is
non-scrollable or if you choose a page-per-second rate.
To compose a graphic for a crawl effect:
1. Activate a graphic window (F5).
2. In the Text menu, select Horizontal Scrolling.
3. Compose the text for the crawl. If you are composing more than one
row of text to crawl, use the Enter key to create up to three
additional rows.
4. Save the graphic.
Notes
By default, text composed without horizontal scrolling
selected crawls across the bottom of the screen.
You can create multi-row crawls of up to four rows of text.
To run a crawl effect:
1. Activate the Sequence window (F11).
2. Enter the graphic’s file name, specify “crawl” as the effect, and
enter a playback rate.
3. Press Alt+Enter to run the effect. See Creating a Sequence.
To crawl text across a specific row of the screen:
1. Follow the above instructions for composing a graphic for a
“crawl” effect.
2. Before you save the graphic, move the cursor to the top row of text.
Press Alt+
↓
to move the text down to the desired screen location.
3. Follow the above instructions for running the crawl effect.