Pinnacle Speakers FXDEKO - Manual (Page 129)

Specifying User Preferences 129
FXDeko User’s Guide
U SER P REFERENCES
To specify preferences:
1. From the Options menu, choose Preferences.
2. In the dialog box, select the tab for the type of preferences you
wish to specify: Common, Prompts, Paths, Cursor, Marker or
Advanced.
Note
Hardware settings are described in the FXDeko Installation
Guide.
To save current preferences:
In the Options menu, check Save Settings Now.
To automatically save current preferences each time
you exit FXDeko:
In the Options menu, check Save Settings on Exit.
To reset preferences to factory default settings:
1. From the Options menu, choose Preferences.
2. In the dialog box, choose the type of preference you wish to
change: Common, Prompts, Paths, Cursor, Markers or Advanced.
3. In the dialog box, choose Set this page to defaults, then click OK or
press Enter.
To reset all preferences, hardware settings or
software settings to factory defaults:
1. From the Options menu, choose Factory Defaults.
2. Select the type of settings you wish to change:
•
User Preferences as set in Options/Preferences
•
Hardware Settings as set in Options/Hardware Settings
•
Software Settings, which includes all program settings not
explicitly set in Hardware Settings or Preferences — current
preset styles and shaders, window freeze status, etc.
3. Click OK or press Enter.