Panasonic DMP-BDT350 - Manual (Page 11)

11
VQT2J87(ENG)
C
o
nn
e
c
ti
o
ns
&
Se
tt
in
g
s
Analog Audio
∫ Via a COAXIAL or OPTICAL terminal ∫ Via a 5.1/7.1ch AUDIO OUT terminal
≥ When connecting a TV (> 8) with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
≥ Set “Digital Audio Output” depending on the used terminal
and connected amplifier/receiver (> 31).
Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
c Subwoofer
d Center speaker
e Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set the “Analog Audio Output” to “7.1ch” or “2ch (Downmix)
+ 5.1ch”, depending on the used terminal (> 32).
≥ You can set the “Analog Audio Output” from the easy setting
(> 14).
≥ When connecting equipment with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
COAXIAL IN OPTICAL IN
Amplifier/receiver
Coaxial
cable Optical
cable
OR
    
Connect Audio cables to
terminals corresponding
to the speakers you have
connected.
Multi channel speakers
Amplifier/receiver
DMP-BDT300_VQT2J87_eng.book 11 ページ ２０１０年１月１８日 月曜日 午後５時２７分