Panasonic DMP-BDT350 - Manual (Page 33)

33
VQT2J87(ENG)
S
e
tt
ings
Network Easy Setting ( > 15)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic
products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so
contents of the following will be different from the time it is
set to “Off”.
– Idle power consumption will increase. (about the power
consumption > 43)
– The cooling fan may turn slowly to prevent overheating of
internal parts.
Easy Setting
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Analog Audio Output”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” to the default settings.
DivX Registration ( > 22)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit, wireless LAN module of
your Wireless LAN Adaptor.
Firmware Update ( > 17)
Press [OK] to show the following settings:
Network
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will
be displayed.
Double Speed Mode Setting (2.4GHz) [BDT350]
When a 2.4 GHz wireless format is used, this setting sets
the connection speed.
≥ If you connect using the “Double Speed Mode(40MHz)”,
2 channels use the same frequency band, and there is
consequently a greater risk of reception interference.
This can cause the connection speed to drop or the
connection to become unstable.
IP Address/DNS Settings
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings ( > 25) (VIERA CAST)
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while using
the VIERA CAST.
≥ Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥ Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
and you can update it if necessary.
Update Now
You can update the firmware manually.
DMP-BDT300_VQT2J87_eng.book 33 ページ ２０１０年１月２１日 木曜日 午後８時９分