Panasonic AJ-D450 - Manual (Page 31)

– 31 –
Setup menus
The underline on the setting item denotes the initial setting.
Item Setting
No.
Superimposed
display
Description
No.
Superimposed
display
USER menu
002 CHARA
V-POS
003 DISPLAY
SEL 0000
0001
0002 TIME
T&STA
T&S&M
005 TAPE
TIMER 0000
0001
±
12h
24h
0000
0018
0022
0
18
22
..
.
..
.
This selects what information is to be provided by the time code
and other super displays output to the VIDEO OUT 3 connector.
0:
1:
2:
<Notes>
• When T&S&M has been selected, one of the following displays
appears on the third line of the superimposed display.
In the DVCPRO mode:
In the DV mode:
In the DVCAM mode:
• An error message is displayed when an warning or error
occurs.
Time only.
Time and status.
Time, status and mode.
004 LOCAL
ENA 0000
0001
0002 DIS
ST&EJ
ENA
This selects the buttons which can be operated on the front
panel when the REMOTE/LOCAL switch has been set to
REMOTE.
0:
1:
2:
No buttons can be operated.
Only the STOP and EJECT buttons can be operated.
All buttons can be operated.
This selects the 12 or 24 hour display for the CTL counter.
0:
1:
<BASIC> (continued)
This sets the position of the characters on the vertical plane
for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Notes>
1.
2.
When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3 even if SUPER OFF has been set.
However, when the menu is exited, operation complies
with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3 according
to the status set in the menu.
When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value
is changed so that the characters are automatically
displayed in a position on the screen.
..
.
..
.
12 hour display
24 hour display
006 SUPER 0000
0001 OFF
ON
This selects whether the time code and other super display
which are output to the VIDEO OUT 3 connector is to shown.
0:
1:
Not shown.
Shown.
007 CHARA
TYPE 0000
0001 WHITE
W/OUT
This selects the display type for the super display output to
the VIDEO OUT 3 connector as well as for displays such as
the setting menu, etc.
0:
1:
White characters against a black background.
White characters with a black border.
DVCPRO MODE
DV MODE
DVCAM MODE
001 CHARA
H-POS 0000
0005
0012
0
5
12
..
.
..
.
This sets the position of the characters on the horizontal
plane for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Notes>
1.
2.
..
.
..
.
When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3 even if SUPER OFF has been set.
However, when the menu is exited, operation complies
with the SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3 according
to the status set in the menu.
When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value
is changed so that the characters are automatically
displayed in a position on the screen.