Audio v fade function – Panasonic AJ-D450 User Manual
Page 50
– 50 –
Audio V Fade Function
(AJ-D450 only)
When editing tapes, the edit point splicing selection (setup menu No. 309 and 310)
information is recorded on the tape. This information is then sensed during playback, and V
fade or cut processing is automatically performed for these sections. [However, only when
the playback fade selection (No. 719) is AUTO.]
When the edit point splicing selection (setup menu No. 309 and 310) is CUT
When the edit point splicing selection (setup menu No. 309 and 310) is FADE
<Notes>
•
When the playback fade selection (No. 719) is CUT, cut processing is performed for all
splices.
•
When the playback fade selection (No. 719) is FADE, V fade processing is performed for
all splices.
Audio singal A
Noise may appear at the edit splice.
Audio singal B
Audio singal A
Audio singal B
V fade is performed instantaneously to eliminate the noise.