Panasonic AJ-D450 - Manual (Page 35)

– 35 –
The underline on the setting item denotes the initial setting.
* The Setup menu can only be displayed for the model AJ-D450.
Item Setting
No.
Superimposed
display
Description
No.
Superimposed
display
USER menu
305* EDIT
RPLCE1
0000
0001
0002
0003 N-DEF
CH1
CH2
CH1+2
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0:
1:
2:
3:
Not set.
Compliance with analog CH1 edit preset.
Compliance with analog CH2 edit preset.
Compliance with either analog CH1 ot CH2 edit preset.
<EDIT>
306* EDIT
RPLCE2
0000
0001
0002
0003 N-DEF
CH1
CH2
CH1+2
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0:
1:
2:
3:
Not set.
Compliance with analog CH1 edit preset.
Compliance with analog CH2 edit preset.
Compliance with either analog CH1 ot CH2 edit preset.
This selects the video signal processing.
0:
1:
This selects STD or NON-STD in accordance with the
composite input signal.
0:
1:
2:
Servo is synchronized with the input signal during recording
and editing, or with the REF signal during playback.
Servo is synchronized at all times with the REF signal.
303* STD/
NON-STD
0000
0001
0002 AUTO
STD
N-STD
304* SERVO
REF
0000
0001 AUTO
EXT
Standard/non-standard signals are automatically identified
and processed.
Standard signals are processed. (Forced STD)
Non-standard signals are processed. (Forced NON-STD)
307* EDIT
RPLCEC
0000
0001
0002
0003 N-DEF
CH1
CH2
CH1+2
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or
controller.
0:
1:
2:
3:
Not set.
Compliance with analog CH1 edit preset.
Compliance with analog CH2 edit preset.
Compliance with either analog CH1 ot CH2 edit preset.
309* AUD EDIT
IN
0000
0001 CUT
FADE
This selects the connection method for the digital audio edit
IN point.
0:
1:
Cut processing
V Fade processing
310* AUD EDIT
OUT
0000
0001 CUT
FADE
This selects the connection method for the digital audio edit
OUT point.
0:
1:
Cut processing
V Fade processing