Panasonic KX-TH102-C - Manual (Page 15)

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 15
If you subscribe to a DSL service
Please attach a noise filter (contact your DSL provider) to the telephone line between the
base unit and the telephone line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 36) do not function properly.
To connect to a 2-line telephone jack
For this connection, please purchase a Panasonic 2-line splitter (page 6).
Example: DSL line is line 2
To connect to 2 single-line telephone jacks
Example: DSL line is line 2
LINE1/2 LINE2 LAN
LINE 2 LINE 1 2-line
splitter
2-wire telephone line cord
with transparent plugs
4-wire telephone line cord
with green plugs
To 2-line telephone jack (RJ14C)
Noise filter
LINE1/2 LINE2 LAN
Line 1
Line 2
To single-line telephone
jacks (RJ11C)
Noise filter
2-wire telephone line cord with transparent plugs
4-wire telephone line cord
with green plugs
TH102-C.book Page 15 Monday, March 13, 2006 2:41 PM