Panasonic KX-TH102-C - Manual (Page 69)

Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp 69
Ringer tone
You can change the ringer tone heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1
{
MENU} (center of joystick) i f
i {SELECT}
2
“Ringer for cell” i {SELECT}
3
“Ringer tone” i {SELECT}
4
Select the desired item. (Default: “Tone
3”) i {SAVE} i {OFF}
Note:
L
If you erase a customized ring for
cellular call, “Tone 3” (default) is used
instead of that ringer tone.
1
{
CELLULAR}
2
“Cellular setting” i {SET}
3
“Ringer tone” i {SET}
4
Select the desired item. (Default: “Tone
3”) i {SET} i {STOP}
Selecting which unit to ring o
You can select which handset or base unit
rings when you receive a call from one of
the registered cellular phones.
1
{
CELLULAR}
2
“Cellular setting” i {SET}
3
“Assign Base/HS” i {SET}
4
Select the desired cellular phone. i
{
SET}
5
Select the desired unit, then press {>}.
(Default: “All”)
L
The selected units are indicated by
“Q”.
L
To cancel a selected unit, press {>}
again.
6
{
SET} i {OFF}
Answering system settings for
cellular calls o
Setting the answering system for a
cellular call
This feature allows the base unit to answer
cellular calls when you are not available to
answer cellular calls.
Important:
L
To use this feature, you need to turn on
the answering system for line 1 and/or
line 2 (page 55).
L
If this feature is turned on, the base unit
plays the greeting message for line 1
and message is recorded on line 1.
1
{
CELLULAR}
2
“Cellular setting” i {SET}
3
“TAD (cell)” i {SET}
4
Select the desired setting. (Default:
“Off”) i {SET} i {STOP}
Note:
L “TAD” stands for Telephone Answering
Device.
Ring count
You can change the number of times the
cellular phone rings before the base unit
answers cellular calls.
1
{
CELLULAR}
2
“Cellular setting” i {SET}
3
“TAD ring count” i {SET}
4
Select the desired number. (Default:
“4”) i {SET} i {STOP}
Handset
Base unit
TH102-C.book Page 69 Monday, March 13, 2006 2:41 PM