Panasonic KX-TH102-C - Manual (Page 26)

C
Making/Answering Calls
26 For assistance, please visit http://www.panasonic.com/phonehelp
Making calls
Using the handset
Y
1
Lift the handset and dial the phone
number.
L
To correct a digit, press {CLEAR}.
2
{C}
L
An available line is automatically
selected and the line number is
displayed.
3
When you finish talking, press {OFF}.
Note:
L
You can also select a line by pressing
{
LINE1} or {LINE2} in step 2.
L To change the line selection, see page
51.
Using the speakerphone
Important:
L You can place the handset on the
charger while using the speakerphone.
The call is not disconnected.
1
During a conversation, press {s} to
turn on the speakerphone.
L
Speak alternately with the other party.
2
When you finish talking, press {OFF}.
Note:
L Use the speakerphone in a quiet
environment.
L
To switch back to the receiver, press
{C}
.
Adjusting the receiver/speaker volume
Push {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1
{ REDIAL}
2
Push {^} or {V} to select the desired
number.
L To erase the displayed number, press
{
CLEAR}.
3
{C}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1
{
9} i {PAUSE} i Dial the phone
number.
2
{C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
TH102-C.book Page 26 Monday, March 13, 2006 2:41 PM