Panasonic KX-TH102-C - Manual (Page 42)

Intercom
42 For assistance, please visit http://www.panasonic.com/phonehelp
Transferring a call to the
answering system
Y o
When you answer a call and the caller
wants to talk to someone who is not
available, you can transfer the caller to the
answering system, where the caller can
leave a message.
Tell the outside caller you will transfer him
or her to the answering system.
1
During an outside call, press
{
INTERCOM} to put the call on hold.
2
Press {9} to hang up the call.
1
During an outside call, press
{
TRANSFER} to put the call on hold.
2
Press {9} to hang up the call.
Note for handset and base unit:
L
After you press {9}, the caller hears the
greeting message (page 55) and can
leave a message after the beep.
Conference calls
Conference call with 2 outside
calls
Y o
While you are talking with an outside caller,
you can make or answer a 2nd call on the
other line, and then combine the calls to
establish a conference call.
1
During an outside call, press {HOLD} 2
times.
2
To answer a 2nd call, press {LINE1} or
{
LINE2}.
To make a 2nd call, press {LINE1} or
{
LINE2}, then dial the phone number.
3
When the 2nd call is connected, press
{
CONF} to make a conference call.
L
To hang up only one line, press
{
LINE1} or {LINE2} for the party with
which you want to continue talking.
L
To put both lines on hold, press
{
HOLD}. To talk with only one caller,
press {LINE1} or {LINE2} for the
party with which you want to continue
talking. To resume both lines, press
{
CONF}.
1
During an outside call, press {HOLD}.
2
To answer a 2nd call, press {LINE1} or
{
LINE2}.
To make a 2nd call, press {LINE1} or
{
LINE2}, then dial the phone number.
3
When the 2nd call is connected, press
{
CONF} to make a conference call.
L To hang up only one line, press
{
LINE1} or {LINE2} for the party with
which you want to continue talking.
L To put both lines on hold, press
{
HOLD}. To talk with only one caller,
Handset
Base unit
Handset
Base unit
TH102-C.book Page 42 Monday, March 13, 2006 2:41 PM