Panasonic KX-TC1220ALW - Manual (Page 18)

Ringer
Low
❚ ❚ ❚ ❚ ❚ ❚ High
GF
Selecting the Ringer Volume
You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring. Your phone comes
from the factory set to HIGH.
With the handset
Make sure the unit is in the standby mode initially.
1 Press (FUNCTION/EDIT) .
2 Press Ö or Ñ repeatedly until the
arrow points to “Ringer volume”
and press
á (Yes key).
3 Press Ö or Ñ to select the
desired volume.
•The selected volume is displayed and
rings.
•To turn the ringer OFF, press and
hold Ö until 2 beeps sound.
To turn the ringer ON, press Ñ or Ö
in step 3.
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a call is being received. Press Ö or
Ñ while the unit is ringing.
•When set to OFF, “Ringer off” will flash for about 45 seconds before the
handset returns to the standby mode.
Programmable Functions
18
With the base unit
Make sure the unit is in the standby mode initially. (You can also
select the ringer volume while a call is being received.)
To select HIGH or LOW, press
(HOLD/RINGER) . Each time you press the
button, the ringer volume will change and
the selected ringer volume will ring.
To turn the ringer OFF, press and hold
(HOLD/RINGER) until 2 beeps sound.
To turn the ringer ON, press
(HOLD/RINGER) .
•The ringer will sound at the HIGH level.
(HOLD/RINGER)
Low
❚ ❚ ❚ ❚ ❚ ❚
High
Ringer off OFF
Save directory
H
Ringer volume
GF H
=Yes
HIGH
LOW
Ц С
Ц С