Panasonic KX-TC1220ALW - Manual (Page 32)

Using the Caller List
32
Editing the Caller’s Phone Number
You can edit a phone number in the Caller List. After editing the number,
you can continue with calling back or directory storing procedures.
Make sure the unit is in the standby mode initially.
1 Lift the handset off the base unit.
OR
If the handset is off the base unit,
press
Ü or á to enter the list.
2 Press Ö or Ñ repeatedly to find the
desired caller.
3 To add a number
Add a number to the current number using the dialling buttons
(
(0) to (9) ).
.
•If you misdial, press Ü and dial again.
To erase the number
Press (FUNCTION/EDIT) , then press Ü to erase the digit.
•You can also add a number if required.
4 After editing the number, you can continue with calling back or
storing procedures.
To call back, press
(TALK) (p. 31).
To store the number in the directory, press á and follow the
instructions on the display (see page 33, from step 3).
0355566677
11:20A 20.12
√
5 new calls
G
=New
F
=Old
•If the phone number does not include the area code (which is the same as your
area code, p. 20), you can view the original number (area code + phone number)
by pressing (FUNCTION/EDIT) again in step 3.
•The number edited in step 3 will not be maintained in the Caller List.
For New Zealand Users:
Your telephone company may charge you for a local call if the number
dialled has the area code prefix included. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled from
your telephone. Do not dial the “0” prefix or the area code digit.