Panasonic KX-TC1220ALW - Manual (Page 46)

Intercom
46
During an intercom call:
•Intercom calls can only be ended with the handset.
•If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing VOLUME .
•If an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, press (TALK) or (DIGITAL!SP-PHONE).
Transferring a Call Using the Intercom
The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
1 Handset:
During a call, press
(INTERCOM) . Talk to the
paged party after the beeps.
•The call is put on hold and
“Intercom hold” is displayed.
•If the base unit user does not
answer, press (TALK).
2 Base unit:
When the paging party’s
voice is heard, talk into the
MIC.
3 Base unit:
To answer the call, press
(DIGITAL!SP-PHONE) .
•The transfer is complete.
From the base unit to the
handset
1 Base unit:
During a call, press
(LOCATOR/INTERCOM) .
•The call is put on hold.
•If the handset user does not
answer, press
(DIGITAL!SP-PHONE).
2 Handset:
Press
(INTERCOM) to answer
the page.
•“Intercom hold” is displayed.
3 Handset:
To answer the call, press
(TALK) .
•The transfer is complete.