Panasonic KX-TC1220ALW - Manual (Page 19)

19
Preparation
Setting the LCD Contrast
You can program the handset LCD contrast (5 levels). To make the
handset display clearer, set to high level. Your phone comes from the
factory set to level 3.
Make sure the unit is in the standby mode initially.
1 Press (FUNCTION/EDIT) .
2 Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3 Press á (Yes key).
4 While the arrow points to “LCD
contrast
”, press á (Yes key).
5 Press Ö or Ñ to select the desired
contrast.
•Each time you press Ö or Ñ, the LCD
contrast will change.
6 Press á (Save key).
•A beep sounds.
•To return to the standby mode, press
(EXIT/CH).
•You can exit the programming mode any time by pressing (EXIT/CH).
LCD contrast
Low
❚ ❚ ❚ ❚
High
GF H
=Save
H
Program
GF H
=Yes
H
LCD contrast
Set recall
GF H
=Yes