Pioneer DV-434 - Manual (Page 12)

12
4 AUDIO button
Press repeatedly to select one of the audio
languages and/or audio formats programmed on a
DVD (page 33).
For Video CD and CD, each press changes the audio
output as follows.
5 SETUP button*
Press when the player is in either play or stop mode
to open and close the Setup screen (page 17).
6 MENU button*
Use to display or close the DVD menu screen (page
21).
7 PREV
4 button (previous)
During playback, press PREV
4 to go back to a
previous chapter/track (page 22).
8 PLAY 3 button
Press to start disc playback (pages 20, 23).
9 STOP 7 button
Press to stop playback. Pressing once enables
playback to resume from a point shortly before the
location where it was stopped. Pressing twice
causes the disc to return to the beginning of the disc
when playback starts again (page 23).
0 STEP/SLOW e/E buttons
Press STEP/SLOW E during playback to view
slow playback. In pause mode, press STEP/SLOW
E to advance DVDs and Video CDs frame by frame
and STEP/SLOW
e to back up a few frames at a
time (page 39).
- Number buttons (1-9, 0, +10)*
Use to perform direct title and chapter/track
searches, and to input numerical values.
= PROGRAM button
You can program titles, chapters, or tracks to play
back in a desired order. Programs can be a
maximum of 24 steps. Additionally, DVD programs
for up to 24 discs can be stored in the player’s
memory for future use (page 43-45).
~ RANDOM button
Press to play chapters/tracks in random order (page
42).
! CONDITION MEMORY button
You can store in memory the settings for up to 15
DVDs. Press CONDITION MEMORY during DVD
playback to memorize the settings (page 47).
@ OPEN/CLOSE
0 button
Press to open or close the disc tray (pages 20, 23).
Remote Control
=
Stereo
=
1/L (Left)
=
2/R (Right)
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
RETURN
PREV NEXT
REV
PLAY
FWD
PAUSE
PROGRAM REPEAT
VOLUME CHANNEL
REPEAT
TV
TV
FUNC
TV CONTROL
A-B
LAST
MEMORY
CONDITION
MEMORY
SEARCH MODE
RANDOM
STOP
STEP/SLOW
ENTER
DISPLAY
CLEAR
5
5
5
5
4 ¢
1
8 7
e E ¡
3
1 2 3
4 5 6
7 8 9 0
+10
C
Î
0
SETUP TOP MENU MENU
$
%
^
&
*
(
)
_
+
¡
£
¢
™
1
2
3
4
5
6
7
8
9
0
-
=
~
!
@
#
(Buttons indicated with * are used for menu operation.)
1 LAST MEMORY button
You can resume DVD or Video CD playback from the
point you last watched even if the disc is removed
from the player. Press LAST MEMORY during
playback to set a Last Memory point. When you
want to resume playback of that disc, press LAST
MEMORY in the stop mode and playback starts
from the memorized point. Last Memory locations
can be stored for up to 5 DVDs and 1 Video CD
(page 46).
2 (standby/on) button
Press to switch the player on or to put in standby
(pages 20, 23).
3 SUBTITLE button
Press repeatedly to select one of the subtitle
languages programmed on a DVD or to turn the
subtitles off (page 34).