Pioneer DV-434 - Manual (Page 24)

24
(Example)
(Example)
Using the Setup Screen
Menus
The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to
set and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up player using the Setup
Navigator (page 17). If you selected “Auto Start Off”
when the Setup Navigator appeared, you may still set up
the player using the Setup Navigator in the General menu
screen.
If you choose not to use the Setup Navigator, be sure to
make the necessary settings in the Setup screen
Audio 1, Audio 2, Video, and Language menus as
described on the following pages.
Some DVDs start playing automatically when loaded in
the player. If a DVD has been loaded, be sure to press
STOP
7 before proceeding.
1
Press STANDBY/ON on the front panel
( on the remote control)
2
Press SETUP.
The Setup screen appears.
3
Use the cursor buttons (
2/3) to select the
menu you want.
As each menu is selected with the cursor, the
settings appear below the menu heading.
4
Use the cursor buttons (
∞) to enter the
menu.
The top item within the menu becomes highlighted.
5
Use the cursor buttons (
5/∞) to select the
setting you want to change.
The options available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
6
Use the cursor buttons (
3) to enter the
setting options.
• Not all menu options can be changed while a disc
is playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP
7 first
before pressing SETUP.
• Operating the menu after pressing STOP 7 may
cancel the resume function.
• Some menu options are not immediately
effective if set while a disc is playing. To make
these settings effective, stop playback and then
start again, or change the settings while the disc
is stopped.
(Example)
Adjusting Audio
and Video
Settings
continued
1
2
3, 4, 5, 6
Audio1 Audio2 General Language Video
Dolby Digital Out
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Move Exit
Dolby Digital 3 PCM
Dolby Digital
SETUP Select ENTER
Output Dolby Digital
Audio1 Audio2 General Language Video
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Move Exit
Dolby Digital 3 PCM
Dolby Digital
SETUP
Dolby Digital Out
Change Dolby Digital output mode
Audio1 Audio2 General Language Video
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
SETUP Move Exit
Setup audio
Digital output format/tone adjust
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
RETURN
PREV NEXT
REV
PLAY
FWD
PAUSE
PROGRAM REPEAT REPEAT
TV CONTROL
A-B
LAST
MEMORY
CONDITION
MEMORY
SEARCH MODE
RANDOM
STOP
STEP/SLOW
ENTER
DISPLAY
CLEAR
5
5
5
5
4 ¢
1
8 7
e E ¡
3
1 2 3
4 5 6
7 8 9 0
+10
C
0
SETUP TOP MENU MENU
STANDBY/ON FL DIMMER
FL OFF
DVD PLAYER
3 8 7 ¡ ¢ 4 1 0
О
1