Pioneer DV-434 - Manual (Page 45)

45
ADV
ANCED FUNCTIONS
To make a program of your favorite parts of a
disc as it plays – DVD/Video CD/CD
With this player, it is possible to make a program as you
watch a DVD or Video CD or while listening to a CD.
Press and hold PROGRAM for at least 2
seconds at any point during playback of a title,
chapter, or track you want to program, and it
will be made into or added to a program
without displaying a Program screen. When a
title, chapter, or track is successfully added to
the program, it is shown momentarily in the
display as well as its position in the program.
To confirm the contents of a program:
Press PROGRAM.
Notes
• When using this function to program DVDs, the program
being created corresponds to the Program screen (chapter
or title) that appears when PROGRAM is pressed. Be sure
to check that the appropriate program type is selected.
• You cannot make a program containing chapters in
different titles.
To save a program in memory – DVD
This player can memorize the programs on up to 24
DVDs. By turning the [Program Memory] to [On], the
player will save your program and recall it the next time
you use the same DVD. When the program memory
exceeds 24, programs will be erased in chronological
order from the oldest program in memory.
1
Use the cursor button (
∞) to highlight
[Program Memory] and use the cursor
button (
3) to select [On].
2
Press ENTER.
The program is saved in memory.
Note
When a DVD with a program stored in memory is loaded,
program playback may start automatically.
Program Chapter Program Title
Current:
Title
Title
1 (Chapter 1 ~ 49)
Program Memory
PROGRAM Exit Move
09 07 18
On
Off
7 Chapter 1
Chapter 07 3 Program 03
To erase a program saved in memory – DVD
The player erases programs in chronological order when
the maximum number of programs that can be held in
memory is exceeded. To prevent the player from erasing
older programs that you may still use regularly, or when
you don’t want to use a program anymore, it is possible
to manually erase programs stored in memory.
1
Load a DVD that has a program stored in
memory.
2
Press PROGRAM.
The program screen appears.
3
Use the cursor button ( ∞) to highlight
[Program Memory] and use the cursor
buttons (
3/∞) to select [Off].
4
Press ENTER.
The program is cleared from memory.