Panasonic WV-NP1000 - Manual (Page 8)

Turn on/off audio *3
* The [Audio] button will be displayed only when "ON" is selected for "Mic mode"
on the setup menu. ( ☞ page 26)
Display a still picture (one
shot)
When this button is clicked, the button will turn into the
button and audio will not be heard.
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the "Live" page will be dis-
played on it.
To save this picture on a PC, right-click on the image and
select "Save image as…" on the displayed pop-up menu.
When this button is clicked, the button will turn into the
button and audio will be heard.
Acknowledge alarm occur-
rences *2
8
Images will be automatically switched between colo ur and B/W
according to brightness (illumination).
Click this button when using the camera in the nighttime with
near-infra red rays as light source.
Operation Description
This button will be displayed when an alarm occurred. When
this button is clicked, the alarm output connector will be reset
and this button will disappear.
When "Latch" is selected for "Alarm output setup", the alarm
output connector will be reset by clicking this button.
(
☞ page 30)