Panasonic KX-P8415 - Manual (Page 19)

19
Caution:
B Do not use a media for ink jet that may be
wrapped around the fuser roller and cause
damage.
■ Setting media thickness switch
Because of the most reliable paper-picking for
various media weights, media thickness can be
manually selected.
Open the left side door.
Move the switch to the desired setting.
■ Loading Media
Available media size: 91 mm x 254 mm to
216 mm x 356 mm (3.6
″
x 10
″
to 8.5
″
x 14
″
).
# Open the multi-purpose tray.
$ Extend the media support.
Insert the media with the printing side up into
the multi-purpose tray.
B The height of media should not exceed the
limit mark on the tray, or it may cause a jam.
Notes:
B Place only one envelope in the multi-purpose tray
at a time.
B When a wrinkle occurs, try printing with the
flap inserted in the envelope as shown in figure.
Switch setting Media
Thin (Default)
Middle
Laser paper 75 to 90 g /m 2
(20 to 24 lbs.)
Laser paper 91 to 123 g /m 2
(25 to 32 lbs.)
Label, Transparency, Coated paper
Thick Laser paper 124 to 165 g /m 2
(33 to 44 lbs.)
Envelope #10
Card stock up to 165
g /m 2
Thin
Middle
Thick
1
2
1
2
Taped side facing down
(3M CG3710)
Transparency
Label
Envelope
Short-end
Print side up
Print side up
Loading
Media
Reference
Guide
On the Multi-purpose Tray
#
$