Panasonic KX-P8415 - Manual (Page 7)

7
To avoid machine malfunction, do not use the equipment under the following conditions:
B Liquids near the equipment B
Unstable or unlevel surfaces
B Directly in front of air
conditioning vents
Cautions
B
Direct exposure to sunlight
B Extremely high or low temperature
[temperature range: 10˚C to 32.5˚C
(50˚F to 90.5˚F)]
B Extremely high or low humidity
(humidity range: 20% to 80% RH)
B Condensation due to rapid change
of temperature
B
Areas of poor ventilation
B
Areas of high dust or chemical
fume concentration (solvent etc.)
B
Too much media/document
which exceeds the limit mark
( ) on the guide of the tray. B
Any toner other than genuine
Panasonic toner; it may
damage the printer.
Not genuine toner
B Do not use a media for ink jet
(paper, transparency, etc.) that
may be wrapped around the
fuser roller and cause damage.
Ink jet
media
■ Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded metal surface,
such as the printer’s bare metal frame prior to touching the component.
B
The interface connectors : parallel and optional network
B Electrical components, connectors inside the printer and any components on the optional board (RAM
Expansion Board or Ethernet Card)
B The connector pins on the optional 2nd cassette feeder or auto duplex printing unit for the printer
■ Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
Before
You
Start
Setup
Guide