Pioneer DV-868AVi - Manual (Page 13)

Connecting up 02
13
En
English
5 AC IN
Connect the supplied power cord here, then
plug into a power outlet. Refer to the
illustration below when doing so to make sure
the neutral and live blades are lined up
properly.
6 (AUDIO) – i.LINK connectors
(DV-868AVi only)
4-pin, S400 i.LINK connectors for connection
to i.LINK-equipped receivers and other
components. Each i.LINK connector acts
simultaneously as both input and output
(page 19).
7 HDMI OUT
HDMI output providing a high quality
interface for digital audio and video (page 21).
8 CONTROL IN / OUT
For passing remote control signals to other
Pioneer components (page 23).
9 VIDEO OUT (1&2)
Standard video output(s) that you can
connect to your TV or AV receiver using the
supplied audio/video cable (page 14).
10 S-VIDEO OUT (1&2)
S-Video output(s) that you can use instead of
the
VIDEO OUT jacks (page 15).
11 COMPONENT VIDEO OUT
High quality video output for connection to a
TV, monitor or AV receiver that has
component video inputs.
Connect using a commercially available
three-way component video cable.
Be careful to match the colors of the jacks
and cables for correct connection (page 16).
• You may find it useful to have the manuals
supplied with your other components
handy when connecting this player.
• If you come across any unfamiliar terms
in this section of the manual, take a look
at
Glossary on page 86.
LIVE NEUTRAL N : Neutral
L : Live
AC IN
N L
Power cord
868en.book.fm 13 ページ ２００３年８月１９日 火曜日 午前９時３０分