Pioneer DV-868AVi - Manual (Page 76)

Initial Settings menu 08
76
En
Automatic: Select Auto to start the test tone
output. No sound will be heard from the
subwoofer.
As the test tone plays through each speaker in
turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
press
ENTER to save the settings and exit the
Channel Level setting screen.
Manual: Use the Joystick to move the cursor
up/down to select a speaker.
Move the cursor right (or press ENTER ) then
use the Joystick (up/down) to set the channel
output level.
To turn the test tone on/off for an individual
speaker, move the cursor right. The test tone
continues playing even when you select a
different speaker.
To save the settings and exit, press ENTER
with the channel level field highlighted (as
shown above).
• The subwoofer output will sound quite low
compared to the other speakers.
i.LINK Setup
(DV-868AVi only)
Audio Out
• Default setting: On
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
On
Off
Initial Settings
868en.book.fm 76 ページ ２００３年８月１９日 火曜日 午前９時３０分