Pioneer DV-868AVi - Manual (Page 92)

Additional information 09
92
En
Cannot listen to high-
sampling rate audio
through the optical/coaxial
digital output. • Make sure that Linear PCM Out is set to Down Sample Off (see
Linear PCM Out on page 61).
• As a copy-protection measure, some DVDs do not output 96kHz
audio. In this case, even if set to
Down Sample Off , the player
automatically outputs the audio at 48 kHz. This is not a malfunction.
Cannot output 192kHz or
176.4kHz digital audio from
optical/coaxial output. • The player does not output digital audio from the optical/coaxial
jacks at these sampling rates. The digital output is automatically
downsampled.
Cannot output 96kHz or
88.2kHz digital audio from
optical/coaxial output. • Check that Linear PCM Out is set to Down Sample Off
(see Linear PCM Out on page 61).
• Some discs are digital copy protected and do not output high
sampling rate digital audio. In this case the output is automatically
downsampled.
No DTS audio output from
optical/coaxial output. • If this unit is connected to a non-DTS compatible amplifier or
decoder using a digital audio cable, set
DTS Out to DTS > PCM . If you
do not do this, noise will be output when you play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder
using a digital audio cable, check the amplifier settings, and that the
cable is properly connected.
Audio mix does not sound
right or sounds incomplete
(for example, inaudible
dialog). • Make sure that Audio Output Mode is set to 2 Channel if you've
connected to the stereo inputs on your amplifier or TV (see Audio
Output Mode on page 73).
Disc containing the MP3
tracks won’t play. • This player is compatible with multi-session discs, but only plays
sessions that are closed.
• If the message
UNPLAYABLE is displayed when you try to play a
disc/track, check the audio file formats (see Compressed audio
compatibility on page 9).
Can’t hear effect of
TruSurround • TruSurround does not work with CD, MP3, DVD-Audio, SACD or
96kHz linear PCM DVD.
• The TruSurround effect is only output through the
AUDIO OUT
(2ch) analog audio outputs.
• Make sure that Audio Output Mode is set to 2 Channel (see Audio
Output Mode on page 73).
• The effectiveness of TruSurround varies with the disc.
The audio recorded on a
Super VCD disc is not
output properly. • If the audio is switched to [2] when playing a Super VCD that
contains only one stereo soundtrack, there may be no sound at all.
Press
AUDIO to change the soundtrack.
Problem Remedy
868en.book.fm 92 ページ ２００３年８月１９日 火曜日 午前９時３０分