Channel level, Initial settings menu 08, English – Pioneer DV-868AVi User Manual

Page 75

Advertising
background image

Initial Settings menu

08

75

En

English

1

Use the Joystick to move the cursor

up/down to select a speaker.

• The

L

and

R

speakers are paired; you can’t

set them differently.

2

Move the cursor right to change the

speaker distance for the highlighted
speaker.

3

Use the Joystick (up/down) to change

the distance.

• When you change the distance settings of

the front left (

L

) or front right (

R

) speakers,

all the other speaker distances change
relative to it.

• Front left/right (

L

/

R

) speaker distances

can be set from 30 cm to 9 m in 10 cm
increments.

• The center speaker (

C

) and subwoofer

(

SW

) can be set from –2 m to +2 m

relative to the front left/right speakers.

• Surround left/right (

LS

/

RS

) speakers can

be set from –6 m to +2 m relative to the
front left/right speakers.

4

Move the cursor left to go back to the

speaker list if you want to modify another
speaker, or press ENTER to exit the
Speaker Distance screen.

• Speaker Distance settings do not affect

SACD playback.

Channel Level

• Default setting:

Fix

You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.

These settings do not affect any digital audio
output.

When set to

Fix

, the level of each of the 5.1

channel analog outputs is fixed. Choose

Variable

if you want to adjust the relative

levels to balance the surround sound better
for your listening room.

You can set the individual channel levels
between –6dB and +6dB in 0.5 dB
increments using the test tone output as a
guide to set the correct levels. Adjust the
levels until the output level from all channels
sounds the same from your usual listening
position. Note that

Audio Output Mode

(page 73) must be set to

5.1 Channel

in order

to use the test tone.

Digital Audio Out

Video Output

Language

Display

Options

Speakers

i.LINK Setup

L
C
R
RS
LS
SW

3m
3m
3m
3m
3m
3m

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Speakers

i.LINK Setup

Audio Output Mode

Speaker Installation

Speaker Distance

Channel Level

Fix

Variable

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Speakers

i.LINK Setup

L
C
R
RS
LS
SW

Auto

0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB

Initial Settings

868en.book.fm 75 ページ 2003年8月19日 火曜日 午前9時30分

Advertising
This manual is related to the following products: