Premio Computer Aries/Centella - Manual (Page 105)

AMI ® BIOS Setup
4-9
BIOS Features Setup
Quick Boot
Setting the item to Enabled allows the system to boot within 5 seconds by
skiping some check items. Settings: Enabled and Disabled.
1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where AMIBIOS
attempts to load the operating system. Possible settings are:
IDE-0 The system will boot from the first HDD.
IDE-1 The system will boot from the second HDD.
IDE-2 The system will boot from the third HDD.
IDE-3 The system will boot from the fourth HDD.
Floppy The system will boot from floppy drive.
ARMD-FDD The system will boot from any ARMD device, such
as LS-120 or ZIP drive, that functions as a floppy
drive.
ARMD-HDD The system will boot from ARMD device, such as
MO or ZIP drive, that functions as hard disk drive.
AMIBIOS SETUP - BIOS FEATURES SETUP
(C)1999 American Megatrends, Inc. All Rights Reserved
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Quick Boot :Enabled
1st Boot Device :Floppy
2nd Boot Device :IDE-0
3rd Boot Device :CDROM
Try Other Boot Devices :Yes
Full Screen LOGO Show :Disabled
S.M.A.R.T. for Hard Disks :Disabled
BootUp Num-Lock :On
Swap Floppy :Disabled
Seek Floppy :Disabled
Password Check :Setup
Boot OS/2 for DRAM > 64MB :No
L1 Cache :Enabled
Flash Protection :Enabled
System BIOS Cacheable :Enabled