Premio Computer Aries/Centella User Manual
Page 52
Hardware Setup
2-17
Power LED (F_P2)
The Power LED is lit while the system power is on. There are two types of
LEDs you can connect from the system case to the pin:
2-pin single color power LED: The power LED is not able to change
its color. Therefore, you can only choose Blinking in the BIOS
utility for the power LED to indicate the suspend/sleep mode.
2-pin dual color power LED: The 2-pin power LED can change its
color to indicate different system states. Therefore, you can select
either Blinking or Dual (color) for the power LED to show the
suspend/sleep mode.
LED Status
Description
Steady Green
The system is in the full-on mode.
Steady Orange
The system enters the suspend/sleep mode.
z
When you select Dual (color) in the BIOS utility:
LED Status
Description
Steady Green
The system is in the full-on mode.
Blinking
The system enters the suspend/sleep mode.
LED Status
Description
Steady Green
The system is in the full-on mode.
Blinking
The system enters the suspend/sleep mode.
z
When you select Blinking:
LED Status
Description
Steady Green
The system is in the full-on mode.
Steady Orange
The system enters the suspend/sleep mode.
z
When you select Dual (color):