Premio Computer Aries/Centella - Manual (Page 82)

AWARD ® BIOS Setup
3-19
Power Management Setup
IPCA Function
This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) Function. If your operating system is ACPI-aware,
such as Windows 98SE/2000/ME, select Enabled. Settings: Enabled and
Disabled.
ACPI Standby State
This item specifies the power saving modes for ACPI function. Options are:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Power Management Setup
↑↓→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
** Reload Global Timer Events **
Primary Master IDE
[Disabled]
Primary Slave IDE [Disabled]
Secondary Master IDE [Disabled]
Secondary Slave IDE [Disabled]
FDC/LPT/COM Ports [Disabled]
Item Help
Menu Level
8
IPCA Function [Enabled]
ACPI Standby State [S1/POS]
Power Management/APM [User Define]
MODEM Use IRQ [3]
Suspend Time Out [Disabled]
Power Button Function [Power Off]
Wake Up On PME [Disabled]
Wake Up On Ring [Enabled]
Wake Up On LAN [Enabled]
USB Wakeup From S3 [Disabled]
CPU THRM-Throttling [50.0%]
Resume By RTC Alarm [Disabled]
Date(of Month) Alarm 0
Time(hh:mm:ss) Alarm 0 : 0 : 0
POWER ON Function [BUTTON ONLY]
KB Power ON Password [Enter]
Hot Key Power ON [Ctrl-F1]
Power Again [Power Off]
Sleep State LED [Blinking]
Item Help
Menu Level
8
- Next Page -