Panasonic CF-31 - Manual (Page 16)

16
Getting Started
l . Do.not.use.the.following.words.for.user.name:.CON,.PRN,.AUX,.CLOCK$,.NUL,.
COM1.to.COM9,.LPT1.to.LPT9,[email protected],.if.you.create.a.user.name.(ac-
count.name).that.includes.the.“@”.mark,.a.password.will.be.requested.at.the.
log-on.screen,.even.if.no.password.has.been.set..If.you.try.to.log.on.without.en-
tering.a.password,.“The.user.name.or.password.is.incorrect.”.may.be.displayed.
and.you.will.not.be.able.to.log.on.to.Windows.(è.page.25).
l . You.cannot.choose.the.following.words.for.user.name.and.password:.CON,.
PRN,.AUX,.CLOCK$,.NUL,.COM1.to.COM9,.LPT1.to.LPT9.
l . When.you.set.date/time/time.zone.and.click.[Next],.the.screen.may.not.go.to.the.
next.step.for.a.few.minutes..Do.not.touch.the.keyboard.or.touch.pad,.and.wait.
until.the.screen.changes.
l . If.“An.unexpected.error.has.occurred....”.(or.a.similar.message).is.displayed,.
click.[OK]..This.is.not.a.malfunction.
6 <Only for model with touchscreen>
Perform the touchscreen calibration.
l . Before.performing.the.calibration,.close.Tablet.PC.Input.Panel.
NOTE
l At first, log on to Windows as an administrator and perform this calibration.
A .Click. .(Start).-.[Control.Panel].-.[Hardware.and.Sound].-.[Tablet.PC.Set-
ting].
B
.Click.[Calibrate].
C
.Using.the.stylus,.touch.each.of.the.“+”.target.marks.one.by.one,.and.then.
click.[Yes].
D
.Click.[OK].
NOTE
l . Perform.the.following.calibration.for.each.user.
A
.Click. .(Start).-.[Control.Panel].-.[Hardware.and.Sound].-.[Tablet.PC.Set-
ting].
B
.Click.[Calibrate].
C
.Using.the.stylus,.touch.each.of.the.“+”.target.marks.one.by.one,.and.then.
click.[Yes].
D
.Click.[OK].
l .Perform.the.calibration.for.the.orientation.to.be.used.
A
.Click.[start].-.[All.Programs].-.[Fujitsu.Touch.Panel.(USB)].-.[Touch.Screen.
Calibration.Utility].
B
.Using.the.stylus,.touch.each.of.the.12.“+”.target.marks.one.by.one.until.it.
blinks,.and.then.press. Enter.
C
.Press. Enter.
First-time Operation
DFQW5516ZAT_CF-31mk2_XP7_OI_M.in16 16 2011/04/27 10:57:28