Panasonic CF-31 - Manual (Page 22)

22
Useful Information
n Using Recovery Disc
Use.the.Recovery.Disc.for.reinstallation.in.the.following.conditions.
Ÿ . You.have.forgotten.the.administrator.password.
Ÿ . Reinstallation.is.not.complete..The.recovery.partition.may.be.broken.
NOTE
Ÿ .When.you.reinstall.OS.using.the.Recovery.Disc,.OS.which.was.installed.as.the.factory.default.will.be.installed..To.
change.OS.from.32.bit.to.64.bit,.or.vice.versa,.reinstall.OS.using.the.recovery.partition.in.the.hard.disk.
Preparation
l . Prepare.the.Recovery.Disc.(è. .Reference Manual.“Recovery.Disc.Creation.Utility”)
l . Remove.all.peripherals.
l . Connect.the.AC.adaptor.and.do.not.remove.it.until.reinstallation.is.complete.
1 Turn on the computer, and press F2 or .Del while [Panasonic] boot screen is displayed.
The.Setup.Utility.starts.up.
l . If.the.password.is.requested,.enter.the.Supervisor.Password.
2 Write down all of the contents of the Setup Utility and press F9 .
At the confirmation message, select [Yes] and press Enter.
3 Press F10 .
At the confirmation message, select [Yes] and press Enter.
Computer.will.restart.
4 Press F2 or .Del. while [Panasonic] boot screen is displayed.
The.Setup.Utility.starts.up.
l . If.the.password.is.requested,.enter.the.Supervisor.Password.
5 Set the Recovery Disc into the CD/DVD drive.
6 Select the [Exit] menu, then select [TEAC DV-W28S-V] in [Boot Override].
7 Press .Enter.
The.computer.will.restart.
8 Click [Reinstall Windows] and click [Next].
The.License.Agreement.screen.appears.
9 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
10 Select the settings and click [Next].
l . [Reinstall.Windows.to.the.whole.Hard.Disk.to.factory.default.].
Select.this.option.when.you.want.to.reinstall.Windows.to.the.factory.default..After.reinstallation,.you.can.create.
a.new.partition..For.how.to.create.a.new.partition,.refer.to.“To.change.the.partition.structure”.(è page.17).
l [Reinstall to the first 3 partitions.] *2 .
Select.this.option.when.the.hard.disk.has.already.been.divided.into.several.partitions..For.how.to.create.a.
new.partition,.refer.to.“To.change.the.partition.structure”.(è page.17)..
You.can.keep.the.partition.structure.
*2 .This does not appear if Windows cannot be reinstalled to the partition containing boot files and the area usable by Windows.
11 At the confirmation message, click [YES].
Reinstallation.starts..(It.will.take.approximately.30.minutes.)
According.to.the.screen,.replace.the.Recovery.Disc.
l . Do.not.interrupt.reinstallation,.for.example.by.turning.off.the.computer..Otherwise.reinstallation.may.become.
unavailable.as.Windows.may.not.start.up.or.the.data.may.be.corrupted.
12 When “Ending process.” is displayed, remove the Recovery Disc, and then click [OK]
to turn off the computer.
13 Turn on the computer.
l . If.the.password.is.requested,.enter.the.Supervisor.Password.
14 Perform the “First-time Operation” (è page 15).
15 Start the Setup Utility and change the settings as necessary.
16 Perform Windows Update.
Reinstalling Software
DFQW5516ZAT_CF-31mk2_XP7_OI_M.in22 22 2011/04/27 10:57:29