Panasonic CF-31 - Manual (Page 26)

26
Troubleshooting
n Display
<Only.for.model.with.GPS>
The.cursor.cannot.be.con-
trolled.properly.
l . Operate.the.following.steps.
A
. .Restart.the.computer.and.press. F2 .or. Del .while.[Panasonic].boot.screen.is.dis-
played.
B
. .Set.[GPS].to.[Disable].in.the.sub-menu.of.[Serial.and.Parallel.Port.Settings].in.the.
[Advanced].menu.of.the.Setup.Utility.
C
. .Press F10 and select [Yes] at the confirmation message, and press Enter ..
The.computer.will.restart.
D
. .Log.on.to.Windows.as.an.administrator.
E . .Click. .(Start).and.input.“c:\util\drivers\gps\GPS.reg”.in.[Search.programs.and.
files], and press. Enter .
F
. .Click.[Yes],.click.[Yes],.and.click.[OK]...
Then.restart.the.computer.
G . .Press. F2 .while.[Panasonic].boot.screen.is.displayed.
H . .Set.[GPS].to.[Enable].in.the.sub-menu.of.[Serial.and.Parallel.Port.Settings].in.the.
[Advanced].menu.
I
. .Press. F10 and select [Yes] at the confirmation message, and press Enter .
n Touch Pad / Touchscreen (only for model with touchscreen)
The.cursor.does.not.work. l . When.using.the.external.mouse,.connect.it.correctly.
l . Restart.the.computer.using.the.keyboard..
.
Press. .and.press.è.two.times,.and.press.  .to.select.[Restart].and.press. Enter .
.
Press. ,. U ,.and. R .to.select.[Restart].
l . If.the.computer.does.not.respond.to.keyboard.commands,.read.“No.response”.
(è.page.27).
Cannot.input.using.the.touch.
pad.
l . Set.[Touch.Pad].to.[Enable].in.the.[Main].menu.of.the.Setup.Utility.
l . The.drivers.for.some.mice.may.disable.the.touch.pad..Check.your.mouse’s.operating.instructions.
<Only.for.model.with.touch.screen>
Cannot.input.using.the.touchscreen. l . Set.[Touchscreen.Mode].to.[Auto].or.[Tablet].in.the.[Main].menu.of.the.Setup.Utility.
l . Set.[Touchscreen.Mode].to.[Auto].or.[Touchscreen.Mode].in.the.[Main].menu.of.the.Setup.
Utility.
Cannot.point.the.correct.posi-
tion.using.the.included.stylus.
l . Perform.the.touchscreen.calibration.(è.page.16).
n Reference Manual
The.Reference.Manual.is.
not.displayed.
l . Install.Adobe.Reader.
A
. Log.on.to.Windows.as.an.administrator.
B
. Click. (Start) and input “c:\util\reader\Setup.exe” in [Search programs and files]
then.press . Enter .
C . Update.Adobe.Reader.to.its.latest.version..
If.your.computer.is.connected.to.the.internet,.start.up.Adobe.Reader.and.click.[Help].
-.[Check.for.Updates...].
B
. Click.[start].-.[Run],.input.[c:\util\reader\Setup.exe],.then.click.[OK].
C
. Update.Adobe.Reader.to.its.latest.version..
If.your.computer.is.connected.to.the.internet,.start.up.Adobe.Reader.and.click.[Help].
-.[Check.for.updates.now].
Troubleshooting (Basic)
DFQW5516ZAT_CF-31mk2_XP7_OI_M.in26 26 2011/04/27 10:57:30