Flash button – Panasonic X-TSC14B User Manual
Page 39
Advanced Operation
“
39
FLASH Button
Pressing
(FLASH/CALLWAIT)
allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “90, 100, 110, 250, 300, 400, 600, 700 ms
(milliseconds)”. Your phone comes from the factory set to “700 ms”.
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
1
Press
(FUNCTION/EXIT)
.
2
Press
(_)
or
(^)
repeatedly until
“
SET FLASH TIME ?
” is displayed.
3
Press
(fl)
OK/EDIT.
4
Press
(_)
or
(^)
to select the desired
line, “
LINE1
” or “
LINE2
”.
5
Press
(fl)
OK/EDIT (
NEXT
key).
6
Press
(_)
or
(^)
repeatedly until the
desired time is displayed.
7
Press
(fl)
OK/EDIT (
SAVE
key) to set
the flash time.
≥
A beep sounds.
≥
The display will return to step 2. To program the other line, start from
step 3. To return to the standby mode, press
(FUNCTION/EXIT)
or wait for
60 seconds.
≥
You can exit the programming mode any time by pressing
(FUNCTION/EXIT)
.
≥
If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call, etc.). Consult your PBX installer for the correct
setting.
11
:
50
AM
11
/
24
SAVE AUTO# ?
11
:
50
AM
11
/
24
SET FLASH TIME ?
11
:
50
AM
11
/
24
LINE1
1
=NEXT
11
:
50
AM
11
/
24
LINE2
1
=NEXT
11
:
50
AM
11
/
24
700MS
1
=SAVE
PQQX12879ZA-BM03
01.3.7
3:52
PM
y [ W
39