Line selection – Panasonic X-TSC14B User Manual
Page 41
Advanced Operation
“
41
Line Selection
The unit will automatically select a free line which is not being used by a
parallel connected telephone when you make a call. Also the unit will
select the called line when you answer a call. To change the selection,
program as follows.
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
1
Press
(FUNCTION/EXIT)
.
2
Press
(_)
or
(^)
repeatedly until “
LINE
SELECTION ?
” is displayed.
3
Press
(fl)
OK/EDIT.
≥
The current selection is displayed.
LINE1: Line 1 will be selected.
LINE2: Line 2 will be selected.
AUTO: A free line will be selected
(LINE 1 has priority) when
making a call. The called line will
be automatically selected when
answering a call (factory preset).
4
Press
(_)
or
(^)
to select the desired
setting.
5
Press
(fl)
OK/EDIT (
SAVE
key).
≥
A beep sounds.
≥
The display will return to step 2. To return
to the standby mode, press
(FUNCTION/EXIT)
or wait for 60 seconds.
≥
You can exit the programming mode any time by pressing
(FUNCTION/EXIT)
.
≥
Any line can be selected manually regardless of the mode selected in step 4 by
pressing the line button.
11
:
50
AM
11
/
24
LINE SELECTION ?
11
:
50
AM
11
/
24
SAVE AUTO# ?
11
:
50
AM
11
/
24
AUTO
1
=SAVE
PQQX12879ZA-BM03
01.3.7
3:52
PM
y [ W
41