Panasonic NV-MV22GN - Manual (Page 12)

12
LSQT0879
Timer Recording
Easy Timer Programming
Up to 16 timer programmes, including weekly and daily
programmes, can be recorded up to one month in advance by
setting the timer.
Preparations
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Insert a video cassette with an intact erasure prevention tab.
• Check that the clock is set to the correct time. If it has not
been set, refer to page 6.
• When [JET NAVIGATOR] is set to [ON] (See page 8), you
can set the category.
Alternatively, you can see the category on the Navigator list.
(See page 14 for details.)
Operations
In case of [JET NAVIGATOR] is set to [ON];
1 Press [PROG] (7) to display the menu for timer
programme on the TV screen.
2 Press [ 2 1] (28) to set the date
on which the TV programme will
be broadcast, and press [
4] (28).
3 Press [ 2 1] (28) to select the programme position of
the desired TV station, and press [ 4] (28).
4 Press [ 2 1] (28) to set the starting time, and press
[ 4] (28).
• When [ 2 1] (28) is kept pressed, the indication changes
in 30-minute steps.
5 Press [ 2 1] (28) to set the ending time, and press [4]
(28).
6 Press [ 2 1] (28) to set the desired Rec Mode, and
press [ 4] (28).
• SP provides standard recording
time, optimum picture and sound
quality.
LP provides double recording time
with slightly reduced picture and
sound quality.
EP provides triple recording time
with slightly reduced picture and sound quality.
Regarding the [A] indication, refer to page 13.
When you play back a tape recorded in the EP mode, the
monaural sound may be unstable.
7 Press [ 2 1] (28) to select the
Category. Then, select the
desired category by pressing
[
43 2 1] (28).
• When [JET NAVIGATOR] is set to
[OFF] (See page 8), proceed to
step 9.
8 Press [MENU] (9) to make the
previous display appears.
9 Press [TIMER (REC)] (14) to switch the VCR over to
the timer recording standby mode.
• When [JET NAVIGATOR] is set to [ON] (see page 8), the
[PROGRAMME IS COMPLETE. REMAINING
PROGRAMME 49.]
* message appears.
• When [JET NAVIGATOR] is set to [OFF] (see page 8),
the [PROGRAMME IS COMPLETE.] * message appears.
* These messages will not appear if timer recording is
started immediately after [TIMER (REC)]
(14) is
pressed.
To Suspend the Timer Recording Standby
Mode
When you want to use the VCR for playback, normal
recording or some other operation before the programmed
timer recording perform, you can temporarily suspend the
timer recording standby mode by pressing the [TIMER (REC)]
(14) so that the [
] indication on the VCR display disappears
and the [TIMER (REC)] (14) on the main unit put out the
lights.
However, after you have finished using the VCR, be sure to
reactivate the timer recording standby mode by pressing the
[TIMER (REC)]
(14) again otherwise the programmed timer
recording will not be performed.
Weekly and Daily Timer Recording
In step 2 of Easy Timer Programming, select the desired
day by pressing [
2] (28).
Current date !# Weekly !# Daily
!# the day before one month ,···. Current date ...
Weekly:
SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday,
TH=Thursday, FR=Friday, SA=Saturday
Daily:
For example, SU (Sunday)
Timer Recording from an External Signal
Source
If timer recording is performed by a unit
connected to the Audio/Video input
sockets, select the AV indicator in step
3 of Easy Timer Programming for the
programme position.
Setting other Programmes in Succession
Repeat steps 1-9 of Easy Timer Programming.
SP
EASY PROGRAMMING
1. DATE 1. DATE
2. CH 2. CH
7. PUSH TIMER 7. PUSH TIMER
6. CATEGORY 6. CATEGORY
5. REC MODE 5. REC MODE
4. OFF TIME 4. OFF TIME
3. ON TIME 3. ON TIME
END : MENU
SELECT
SET
TIMER
29WE
LP
EASY PROGRAMMING
1. DATE
2. CH
7. PUSH TIMER
6. CATEGORY
5. REC MODE
4. OFF TIME
3. ON TIME
END : MENU
SELECT
SET 2
20:02
21:30
TIMER
END : MENU
CATEGORY SETTING
≥ MOVIE
≥MUSIC
≥ DRAMA
≥ EDUCA
≥ DOCUM
≥ SPORT
≥ CHILD
≥ NEWS
≥ OTHER
≥ – – – – –
29WE
LP
EASY PROGRAMMING
1. DATE
2. CH
7. PUSH TIMER
6. CATEGORY 6. CATEGORY
5. REC MODE
4. OFF TIME
3. ON TIME
END : MENU
SELECT
SET 2
20:02
21:30
TIMER
Daily recording On Screen Display
Monday to Friday MO-FR
Monday to Saturday MO-SA
Sunday to Saturday SU-SA
SU
SP
EASY PROGRAMMING
1. DATE
2. CH
7. PUSH TIMER
6. CATEGORY
5. REC MODE
4. OFF TIME
3. ON TIME
END : MENU
SELECT
SET
TIMER
AV
29WE
SP
EASY PROGRAMMING
1. DATE
2. CH
7. PUSH TIMER
6. CATEGORY
5. REC MODE
4. OFF TIME
3. ON TIME 3. ON TIME
END : MENU
SELECT
SET
TIMER
LSQT0879.book 12 ページ ２００５年１月２６日 水曜日 午後６時１７分