Connections, Tuning the tv to your vcr, Basic connections – Panasonic NV-MV22GN User Manual

Page 4

Advertising
background image

4

LSQT0879

Connections

This section shows you how to connect the VCR to an aerial,
TV, etc.

Basic Connections

The following connections are required to record and play
back the video cassette through the TV.

Connection to a TV using the Audio/Video Input Socket:
Set the RF output channel of the VCR to [

ss] (RF OFF)

when the VCR is connected to the TV via the Audio/Video
cable. (See to the right.)

Tuning the TV to Your VCR

The VCR supplies a signal to the TV via the RF coaxial cable
on channel AU28-69 or NZ21-69.
If you have connected the VCR to the TV through the Audio/
Video input sockets, then you do not need to follow the
procedure below. To view the pictures from the VCR, set to
the AV mode on the TV with [AV]

(2).

Preparation
• Turn on the TV and the VCR.
Operations
1 Hold down [MENU]

(9) for 5 seconds or more.

2 Set the TV to an unused position which you wish to

use for your video playback.

• Tune the TV until the display shown below appears on

the screen. (Please refer to the TV manufacturers
operating instructions regarding tuning.)

3 Press [MENU]

(9).

To Change the RF output Channel

You can change the RF output channel, for example, when
interference occurs on the picture after tuning.

Operations
1 Hold down [MENU]

(9) for 5 seconds or more.

• The VCR display changes as shown below and the VCR

picture on the TV displays this pattern.

2 Enter the desired channel number (AU28-69, NZ21-69)

by [Numeric]

(3) or [CH] (20).

• Set the RF output channel of the VCR to [

ss] (RF OFF)

when the VCR is connected to the TV via the Audio/Video
cable.

• Press [CH]

(20) to display [

ss].

• It is also possible to select by pressing [Numeric]

(3).

Example:

3 Press [MENU]

(9) to finish the setting mode.

4 Retune your TV to the new RF channel for the VCR.

Note:
• Even if the RF output channel has been changed, it is not

necessary to perform Auto Tuning.

AUDIO

VIDEO

AC IN

OUT

IN(AV1)

IN

OUT

RF

(6)

(3)

(5)

(4)

(1)

(2)

¢

(1) Aerial (Not supplied)
(2) TV Set (Not supplied)
(3) Aerial Connector
(4) RF IN socket

(42)

(5) RF OUT socket

(45)

(6) AC Input socket

(39)

¢ To mains supply

AUDIO

VIDEO

AC IN

OUT

IN(AV1)

IN

OUT

RF

(10)

(3)

(4)

(6)

(5)

(9)

(8)

(7)

(1)

(2)

¢

(1) Aerial (Not supplied)
(2) TV Set (Not supplied)
(3) Aerial Connector
(4) VIDEO IN
(5) AUDIO IN
(6) Audio Cable/Video Cable

(Not supplied)

(7) RF IN socket

(42)

(8) RF OUT socket

(45)

(9) VIDEO OUT

(41)/

AUDIO OUT

(44)

(10)AC Input socket

(39)

¢ To mains supply

Panasonic VCR

END: MENU

Panasonic VCR

END: MENU

Example for Australia

Example for New Zealand

ss

(Initial position)

For New Zealand

For Australia

(RF OFF)

E-21

E-69

A-28

A-37

A-69

2

8

28:

LSQT0879.book 4 ページ 2005年2月8日 火曜日 午後7時8分

Advertising